Metal Roofing Everett WA | Standing Seam & Marine-Grade Coatings

Last updated: 2026-08-30

Roofing Everett WA is a roofing company serving Everett and Snohomish County, and metal roofing is one of the services we handle most. This page covers what the work involves here specifically — the climate, the code, and what it costs — rather than what it involves in general.

What we do on the first visit

The first visit is an inspection, not a sales call. We walk the roof with you, check the deck from the attic side where we can, count valleys and penetrations, and note the pitch and how much staging or safety equipment the job needs. We confirm whether any prior layers are on the roof already — code allows a maximum of two before a full tear-off is required — and then you get a written per-square price with tear-off and any deck repair as separate lines.

If we think repair is the better spend than replacement, or a different material suits your situation better, we say so on that visit — including when it means the smaller job for us.

What's included

Standing-seam panel system installed to manufacturer wind-uplift spec for direct Puget Sound exposure
Coating-system selection (PVDF/Galvalume-class finishes) appropriate to salt-air corrosion risk near the waterfront
Fastener selection matched to coastal corrosion resistance, not a generic inland spec
Full tear-off to the deck, with rotten sheathing replaced and priced separately
New flashing and underlayment at every penetration
A realistic maintenance schedule for a coastal-adjacent metal roof

What this costs in Everett

Metal Roofing runs $1,550–$3,400 roofing square (100 sq ft), installed in this area. Valentine Roofing's WA-wide contractor-published range ($39,000-$85,000 for a full metal roof), divided over a typical 25-square home. The things that move a job up its range are tear-off, how much deck repair is needed, pitch, and how many valleys and penetrations your roof has. If you want a number before you call, the roof cost calculator will get you close.

When it needs doing

Considering a material upgrade for better wind resistance on an exposed lot
An existing metal roof showing visible corrosion or coating failure
Wanting a 40+ year roof rather than repeating an asphalt replacement cycle
A waterfront or bluff-lot property with direct Sound exposure
Fastener backout or panel seam separation on an older metal roof

DIY patch, the cheapest bid, or the job done properly

	DIY weekend	Cheapest bid	Done properly
Moss removal	Pressure washer — strips granules, drives water under tabs	Quick scrape, no treatment applied	Gentle hand/brush removal plus treatment, gutters cleared
Material grade	Bargain shingle off the shelf, no algae resistance	Standard grade, warranty terms rarely disclosed	Algae-resistant or premium-grade material with a real warranty, disclosed in writing
Underlayment	Whatever’s left over, felt paper reused	Minimum-code synthetic underlayment	High-wind-rated synthetic underlayment, ice-and-water membrane at eaves and valleys
Deck check	Not considered	Skipped unless asked	Checked from the attic side where access allows, repaired if moss has reached it
Permit	Often skipped	Sometimes skipped	Pulled and inspected every time
If it fails	Your weekend, again, now with a worse leak	Chasing a phone number that stopped working	We come back and fix it

How it works

How metal roofing runs

Free inspection
We assess the deck, existing roof, and the property's proximity to salt-air exposure near Port Gardner or the Snohomish River.
Coating and panel selection
Panel profile and coating system chosen for wind-uplift resistance and coastal corrosion resistance where relevant.
Tear-off and install
Deck repaired where needed, underlayment and flashing installed, standing-seam panels installed to manufacturer spec.
Final walkthrough
Cleanup and a walkthrough of the finished roof, plus a maintenance schedule sized to the property's exposure.

Questions

Metal Roofing questions

Is metal roofing worth it for a waterfront-exposed Everett home?

It resists wind uplift better than shingle in a windstorm, and lasts 40-70 years versus asphalt's 17-30. The tradeoff is higher upfront cost and the need for the right coating system to manage salt-air corrosion near the water — we'll tell you honestly whether your specific lot's exposure justifies it.

Does salt air actually corrode a metal roof?

Yes, over time, without the right coating system — proximity to Port Gardner and the Port of Everett marina is a real factor we account for when specifying panel finish and fasteners.

How long does a metal roof last here?

40-70 years generally, though coastal salt-air exposure can shorten effective service life by an estimated 25-30% without the right coating system — which is exactly why we specify coatings by property location, not a single default.

Do you charge for an estimate?

No. Estimates are free across Everett and Snohomish County, including the drive. We walk the roof with you, check the deck from the attic side where we can, and hand you a written per-square price with tear-off and any deck repair broken out as their own lines.

Also worth a look

Related services

Roof Replacement

Full tear-off roof replacement for Everett and Snohomish County homes and businesses — asphalt shingle, cedar shake, flat/low-slope, or metal, matched to this waterfront climate's wind exposure, with a written price before any work starts.

Metal Roofing in Everett, WA